
Find the type of building you need
This is the full SmartFraming range: granny flats, cabins, tiny homes, sleepouts and studios, garages, farm sheds and two-storey homes, all framed in light gauge steel. Pick a plan as it is, or use it as a starting point and change the openings to suit your site. SmartFraming supplies the steel frames only. Your builder supplies and installs everything else, from foundations to roofing and linings.
What's included
- Wall and roof framing, fully made up or as flat-packs when required
- Drafting changes to adjust opening sizes and positions
- Grommets for the service holes pre-punched through the framing
- Erection screws to stand the frames
- Detailed assembly plans
- Engineering reports to support a council application, for sign-off by a third-party engineer (on request)
Not included: Cladding, roofing, windows and doors, linings, insulation, foundations and installation are supplied by your builder. Delivery is quoted separately, based on your location.
What's included in a steel frame kitset

70m² Two-Bedroom Granny Flat · 9.72 × 7.2 m Gable

70m² Two-Bedroom Granny Flat · 10.3 × 7.2 m Mono

70m² Two-Bedroom Granny Flat · 10.6 × 6.6 m Mono · Layout A

70m² Two-Bedroom Granny Flat · 10.6 × 6.6 m Mono · Layout B

70m² 2.5-Bedroom Granny Flat · 10.28 × 6.8 m Gable

70m² Two-Bedroom Granny Flat · 10 × 7 m Gable

70m² Two-Bedroom Granny Flat · 10 × 7 m Mono

70m² Two-Bedroom Granny Flat · 11.6 × 6 m Hip

70m² Two-Bedroom Granny Flat · 11.7 × 6 m Gable

70m² Two-Bedroom Granny Flat · 11.66 × 6 m Gable

70m² Three-Bedroom Granny Flat · 11.91 × 6.6 m Gable

70m² Two-Bedroom Granny Flat · 10.18 × 7.18 m Gable

31.5m² Four-Bedroom 2-Storey Small Home · 7 × 4.5 m Mono

30m² Three-Bedroom 2-Storey Small Home · 5 × 6 m Mono

32m² Three-Bedroom 2-Storey Small Home · 6 × 6 m Double Mono

30m² Three-Bedroom 2-Storey Small Home · 5 × 6 m Double Mono


24m² Garage · 6 × 4 m Gable / Mono


28m² Garage · 7 × 4 m Gable / Mono



Showing 24 of 163 kitsets
Can't find the exact kitset?
Every design in our range is a starting point. Send us your section, layout and wind zone and we'll tailor a steel frame kitset to suit — or design one from scratch.
